L5 - high dynamic fiber laser
- MM
- INCHES
Technical data L5 (measurements in mm)
| Machine data | L5-30 | L5-40 |
| Working range | ||
| X Y worktable | 3048x1524 | 4064x1524 |
| Z axis stroke | 100 | 100 |
| Accuracy1: | ||
| Position accuracy Pa | 0.08 | |
| Average position range Ps | 0.03 | |
| Fiber laser source | 2000 W | 3000 W | 4000 W | 6000 W |
| Cutting capacity (thicknesses)2 | ||||
| Steel (S185JR,S235JR, RAEX 250 C LASER) | 0.5-15 | 0.5-20 | 0.5-20 | 0.5 - 25 |
| Stainless steel (AISI 304, X5CrNi18-10 1.4301) | 0.5-10 | 0.5-12 | 0.5-15 | 0.5 - 20 |
| Aluminum (Al 99.5 EN AW 1050A) | 0.5-8 | 0.5-10 | 0.5-15 | 0.5 - 20 |
| Copper (Cu-ETP CW004A H040 EN1652) | 0.5-5 | 0.5-8 | 0.5-8 | 0.5 - 10 |
| Brass (CuZn37 CW508L H055 EN1652) | 0.5-5 | 0.5-6 | 0.5-8 | 0.5 - 8 |
| Consumption3 | ||||
| Maximum power consumption (kW) | 16 kW | 18 kW | 21 kW | 28 kW |
- Measure calculated following the norm VDI3441 on the maximum length of the axes.
- The quality of cuts on limit thicknesses will depend on the geometries required, the quality of the material and the operating conditions of the system. At the limit values, the cut may have burrs on the lower edge.
- Actual consumption calculated at full power on a system in a standard configuration, with a standard work cycle.
Salvagnini reserves the right to modify this data without warning.
Technical data L5 (measurements in inches)
| Machine data | L5-30 | L5-40 |
| Working range | ||
| X Y worktable | 120x60 | 160x60 |
| Z axis stroke | 3.9 | 3.9 |
| Accuracy1: | ||
| Position accuracy Pa | 0.003 | |
| Average position range Ps | 0.001 | |
| Fiber laser source | 2000 W | 3000 W | 4000 W | 6000 W |
| Cutting capacity (thicknesses)2 | ||||
| Steel (S185JR,S235JR, RAEX 250 C LASER) | 24 - 19/32” | 24 - 3/4” | 24 - 3/4” | 24 - 1" |
| Stainless steel (AISI 304, X5CrNi18-10 1.4301) | 24 - 3/8’’ | 24 - 7/16” | 24 - 7/16” | 24 - 3/4" |
| Aluminum (Al 99.5 EN AW 1050A) | 24 - 5/16” | 24 - 3/8’’ | 24 - 19/32” | 24 - 3/4" |
| Copper (Cu-ETP CW004A H040 EN1652) | 24 - 3/16” | 24 - 5/16” | 24 - 5/16” | 24 - 3/8" |
| Brass (CuZn37 CW508L H055 EN1652) | 24 - 3/16” | 24 - 7/32” | 24 - 5/16” | 24 - 5/16" |
| Consumption3 | ||||
| Maximum power consumption (kW) | 16 kW | 18 kW | 21 kW | 28 kW |
- Measure calculated following the norm VDI3441 on the maximum length of the axes.
- The quality of cuts on limit thicknesses will depend on the geometries required, the quality of the material and the operating conditions of the system. At the limit values, the cut may have burrs on the lower edge.
- Actual consumption calculated at full power on a system in a standard configuration, with a standard work cycle.
Salvagnini reserves the right to modify this data without warning.
