L3 - Fiber laser

  • MM
  • INCHES

Technical data L3 (measurements in mm)

 

Machine dataL3-30L3-40L3-4020L3-6020
Working range    
X Y worktable3048x15244064x15244064x20326096x2032
Z axis stroke100100100100
Maximum XY speed (m/min)156156156156
Accuracy1:    
        Position accuracy Pa0.08
        Average position range Ps0.03

 

Fiber laser source2000 W3000 W4000 W6000 W (L)6000 W10000 W
Cutting capacity (thicknesses)2      
Steel (S185JR,S235JR, RAEX 250 C LASER)0.5-150.5-200.5-200.5-250.5-250.5-25

Stainless steel (AISI 304, X5CrNi18-10 1.4301)

0.5-100.5-120.5-150.5-200.5-200.5-25
Aluminum (Al 99.5 EN AW 1050A)0.5-80.5-100.5-150.5-200.5-200.5-25 
Copper (Cu-ETP CW004A H040 EN1652)0.5-50.5-80.5-80.5-80.5-80.5-8
Brass (CuZn37 CW508L H055 EN1652)0.5-50.5-60.5-80.5-80.5-80.5-8
Consumption
      
Maximum power consumption (kW)3
16 kW18 kW21 kW28 kW28 kW 45 kW
Average power consumption (kW)411 kW12 kW13 kW16 kW16 kW26 kW

 

  1. Measure calculated following the norm VDI3441 on the maximum length of the axes.
  2. The quality of cuts on limit thicknesses will depend on the geometries required, the quality of the material and the operating conditions of the system. At the limit values, the cut may have burrs on the lower edge.
  3. Maximum consumption calculated on a system in a standard configuration cutting 3 reference sheets of mild steel between 0,8-6mm thickness.
  4. Average consumption calculated on a system in a standard configuration cutting 3 reference sheets of mild steel between 0,8-6mm thickness.


Salvagnini reserves the right to modify this data without warning.

Technical data L3 (measurements in mm)

 

Machine dataL3-30L3-40L3-4020L3-6020
Working range    
X Y worktable (in)120x60160x60160x80240x80
Z axis stroke (in)3.943.943.943.94
Maximum XY speed (ipm)6141614161416141
Accuracy1:    
        Position accuracy Pa0.08
        Average position range Ps0.03

 

Fiber laser source2000 W3000 W4000 W6000 W (L)6000 W10000 W
Cutting capacity (thicknesses)2      
Steel (S185JR,S235JR, RAEX 250 C LASER)24-19/32"24-3/4"24-3/4"24-1"24-1"24-1"

Stainless steel (AISI 304, X5CrNi18-10 1.4301)

24-3/8"24-7/16"24-19/32"24-3/4"24-3/4" 24-1"
Aluminum (Al 99.5 EN AW 1050A)24-5/16"24-3/8"24-19/32"24-3/4"24-3/4"24-1"
Copper (Cu-ETP CW004A H040 EN1652)24-3/16"24-5/16"24-5/16"24-5/16"24-5/16" 24-5/16"
Brass (CuZn37 CW508L H055 EN1652)24-3/16"24-7/32"24-5/16"24-5/16"24-5/16" 24-5/16"
Consumption
      
Maximum power consumption (kW)3
16 kW18 kW21 kW28 kW28 kW 45 kW
Average power consumption (kW)411 kW12 kW13 kW16 kW16 kW26 kW

 

  1. Measure calculated following the norm VDI3441 on the maximum length of the axes.
  2. The quality of cuts on limit thicknesses will depend on the geometries required, the quality of the material and the operating conditions of the system. At the limit values, the cut may have burrs on the lower edge.
  3. Maximum consumption calculated on a system in a standard configuration cutting 3 reference sheets of mild steel between 1/32"-15/64" gage thickness.
  4. Average consumption calculated on a system in a standard configuration cutting 3 reference sheets of mild steel between 1/32"-15/64" gage thickness.


Salvagnini reserves the right to modify this data without warning.

P1
Developed to fit in 8sqm, designed to produce with just 3 kW and optimized to astound you with its bending speed, the P1 is the solution Salvagnini is offering as an alternative to traditional bending.
more info
P2
P2 is the ultimate panel bender able to efficiently produce a large variety of parts. Totally automatic, it guarantees that the first part is a good part.
more info
P4
40 years of automatic panel bender P4: simply our trademark.
Welcome to factory 4.0.
more info
L3
The L3 is the machine that Salvagnini has dedicated exclusively to fiber. Its cutting-edge technology means that it is able to reach the very highest levels in terms of speed and accuracy
more info
L5
With the Salvagnini single-optic cutting head, the compass structure and the cutting parameters developed specifically for it, the L5 provides quality cutting across a wide range of thicknesses with high dynamics.
more info
B3
The B3 was designed by combining the features and benefits of electric and hydraulic press brakes with Salvagnini's in-depth knowledge of automation, software, mechanics and electronics.
more info
ROBOFORMER
The press-brake cell with a single controller and single program, ideal for automatic light-out solutions. A single machine capable of satisfying all your production needs accurately and effectively.
more info
S1
S1 implements innovative and original elements, that make it a solution with a wider range of applications, that goes beyond common similar technology and is unique in the market.
more info
S4
S4Xe: you have chosen to work with the best. An array of technology that guarantees high performance and process efficiency. The winning solution even when working in line with panel benders.
more info
FlexCell
FlexCell combines the features of a Salvagnini
panel bender and a press-brake and is the only solution of its kind on the market for getting the most out of bending.
more info
S4 + P4 line
Flexible manufacturing system. The S4+P4 line is one of Salvagnini’s most popular solutions. It punches, shears and bends sheet metal totally automatically. The first prototype dates back...
more info
MV Automatic tray store
MV automatic tray stores act as a backbone for the entire factory, coordinating and moving automatically the materials needed for the different machining processes just in time, reducing transfer costs and times, while increasing machine efficiency.
more info
Automatic Job Shops
In an AJS™ system, panel production through punching, shearing, laser cutting and/or bending is both automatic and flexible, satisfying a wide variety of production strategies, such as lean...
more info