P4 - Range of automatic panel benders

    home > en > Product > Panel benders > P4 > Technical data
  • MM
  • IN
Machine P4-2116 P4-2120 P4-2225
Technical specifications      
Maximum length of incoming sheet (mm) 2495 2495 2815
Maximum width of incoming sheet (mm) 1524 1524 1524
Maximum diagonal that can be rotated (mm) 2500 2500 2820
Maximum bending force (kN) 330 330 590
Maximum clamping force (kN) 530 530 635
Maximum bending length (mm) 2180 2180 2200
Maximum bending height (mm) 165 203 254
Minimum thickness (mm) 0.4 0.4 0.5
Maximum thickness and bending angle steel, UTS 410 N/mm2 (mm)

3.2 (±90°)
2.5 (±120°)
2.1 (±135°)

3.2 (±90°)
2.5 (±130°)
2.1 (±135°)

3.2 (±90°)
2.5 (±130°)
2.1 (±135°)

Maximum thickness and bending angle stainless steel, UTS 660 N/mm2 (mm)

2.5 (±90°)
2.1 (±120°)
1.6 (±130°)

2.5 (±90°)
2.1 (±125°)
1.6 (±135°)

2.5 (±90°)
2.1 (±125°)
1.6 (±135°)

Maximum thickness and bending angle aluminium, UTS 265 N/mm2 (mm)

4.0 (±120°)
3.5 (±130°)

4.0 (±120°)
3.5 (±130°)

4.0 (±120°)
3.5 (±130°)
3.0 (±135°)

 

Machine P4-2516  P4-2520 
Technical specifications  
Maximum length of incoming sheet (mm) 2795 3050
Maximum width of incoming sheet (mm) 1524 1524
Maximum diagonal that can be rotated (mm) 2800 3200
Maximum bending force (kN) 660 660
Maximum clamping force (kN) 1060 1060
Maximum bending length (mm) 2500 2500
Maximum bending height (mm) 165 203
Minimum thickness (mm) 0.5 0.5
Maximum thickness and bending angle steel, UTS 410 N/mm2 (mm)

3.2 (±90°)
2.5 (±130°)
2.1 (±135°)

3.2 (±90°)
2.5 (±130°)
2.1 (±135°)
Maximum thickness and bending angle stainless steel, UTS 660 N/mm2 (mm)

2.5 (±90°)
2.1 (±125°)
1.6 (±135°)

 2.5 (±90°)
2.1 (±125°)
1.6 (±135°)
Maximum thickness and bending angle aluminium, UTS 265 N/mm2 (mm)

4.0 (±120°)
3.5 (±130°)
3.0 (±135°)

4.0 (±120°)
3.5 (±130°)
3.0 (±135°)

  

Machine P4-3125   P4-3216
Technical specifications    
Maximum length of incoming sheet (mm) 3495 3495
Maximum width of incoming sheet (mm) 1524 1524
Maximum diagonal that can be rotated (mm) 3500 3500
Maximum bending force (kN) 625 660
Maximum clamping force (kN) 825 1060
Maximum bending length (mm) 3100 3200
Maximum bending height (mm) 254 165
Minimum thickness (mm) 0.5 0.5
Maximum thickness and bending angle steel, UTS 410 N/mm2 (mm) 3.2 (±90°)
2.5 (±130°)
2.1 (±135°)		 3.2 (±90°)
2.5 (±130°)
2.1 (±135°)
Maximum thickness and bending angle stainless steel, UTS 660 N/mm2 (mm) 2.5 (±90°)
2.1 (±125°)
1.6 (±135°)		 2.5 (±90°)
2.1 (±125°)
1.6 (±135°)
Maximum thickness and bending angle aluminium, UTS 265 N/mm2 (mm) 4.0 (±120°)
3.5 (±130°)
3.0 (±135°)		 4.0 (±120°)
3.5 (±130°)
3.0 (±135°)

 

Machine P4-3220  P4-3816  
Technical specifications  
Maximum length of incoming sheet (mm) 3850 3990
Maximum width of incoming sheet (mm) 1524 1524
Maximum diagonal that can be rotated (mm) 4000 4000
Maximum bending force (kN) 660 660
Maximum clamping force (kN) 1060 1060
Maximum bending length (mm) 3200 400-3200 3200-3850
Maximum bending height (mm) 203 165
Minimum thickness (mm) 0.5 0.5
Maximum thickness and bending angle steel, UTS 410 N/mm2 (mm)

3.2 (±90°)
2.5 (±130°)
2.1 (±135°)

3.2 (±90°)
2.5 (±130°)
2.1 (±135°)

2.5 (±125°)
2.1 (±130°)
1.6 (±135°)
Maximum thickness and bending angle stainless steel, UTS 660 N/mm2 (mm)

2.5 (±90°)
2.1 (±125°)
1.6 (±135°)

 2.5 (±90°)
2.1 (±125°)
1.6 (±135°)		 2.5 (±90°)
2.1 (±120°)
1.6 (±135°)
Maximum thickness and bending angle aluminium, UTS 265 N/mm2 (mm)

4.0 (±120°)
3.5 (±130°)
3.0 (±135°)

4.0 (±120°)
3.5 (±130°)
3.0 (±135°)

4.0 (±120°)
3.5 (±130°)
3.0 (±135°)

 

 

Machine P4-4020  
Technical specifications  
Maximum length of incoming sheet (mm) 4000
Maximum width of incoming sheet (mm) 1524
Maximum diagonal that can be rotated (mm) 4050
Maximum bending force (kN) 660
Maximum clamping force (kN) 1060
Maximum bending length (mm) 400-3200 3200-3850 3850-4000
Maximum bending height (mm) 203 203  203
Minimum thickness (mm) 0.5
Maximum thickness and bending angle steel, UTS 410 N/mm2 (mm)

3.2 (±90°)
2.5 (±130°)
2.1 (±135°)

2.5 (±125°)
2.1 (±130°)
1.6 (±135°)

1.6 (±130°)
Maximum thickness and bending angle stainless steel, UTS 660 N/mm2 (mm) 2.5 (±90°)
2.1 (±125°)
1.6 (±135°)		 2.5 (±90°)
2.1 (±120°)
1.6 (±135°)		 1.3 (±120°)
Maximum thickness and bending angle aluminium, UTS 265 N/mm2 (mm)

4.0 (±120°)
3.5 (±130°)
3.0 (±135°)

4.0 (±120°)
3.5 (±130°)
3.0 (±135°)

2.5 (±125°)
Machine P4-2116 P4-2120 P4-2225
Technical specifications      
Maximum length of incoming sheet (in) 98.2 98.2 110.8
Maximum width of incoming sheet (in) 60 60 60
Maximum diagonal that can be rotated (in) 98.4 98.4 111
Maximum bending force (kN) 330 330 590
Maximum clamping force (kN) 530 530 635
Maximum bending length (in) 85.8 85.8 86.6
Maximum bending height (in) 6.5 7.9 10
Minimum thickness (gage) 27 27 25
Maximum thickness and bending angle steel, UTS 59500 psi (gage)

11 (±90°)
13 (±120°)
14 (±135°)

11 (±90°)
13 (±130°)
14 (±135°)

11 (±90°)
13 (±130°)
14 (±135°)

Maximum thickness and bending angle stainless steel, UTS 84200 psi (gage)

13 (±90°)
14 (±120°)
16 (±130°)

2.5 (±90°)
2.1 (±125°)
1.6 (±135°)

13 (±90°)
14 (±125°)
16 (±135°)

Maximum thickness and bending angle aluminium, UTS 38500 psi (gage)

7 (±120°)
8 (±130°)

4.0 (±120°)
3.5 (±130°)

7 (±120°)
8 (±130°)
9 (±135°)

 

Machine P4-2516  P4-2520 
Technical specifications  
Maximum length of incoming sheet (in) 110 120
Maximum width of incoming sheet (in) 60 60
Maximum diagonal that can be rotated (in) 110.2 126
Maximum bending force (kN) 660 660
Maximum clamping force (kN) 1060 1060
Maximum bending length (in) 98.4 98.4
Maximum bending height (in) 6.5 8
Minimum thickness (gage) 25 25
Maximum thickness and bending angle steel, UTS 59500 psi (gage)

11 (±90°)
13 (±130°)
14 (±135°)

11 (±90°)
13 (±130°)
14 (±135°)
Maximum thickness and bending angle stainless steel, UTS 84200 psi (gage)

13 (±90°)
14 (±125°)
16 (±135°)

 13 (±90°)
14 (±125°)
16 (±135°)
Maximum thickness and bending angle aluminium, UTS 38500 psi (gage)

7 (±120°)
8 (±130°)
9 (±135°)

7 (±120°)
8 (±130°)
9 (±135°)

  

Machine P4-3125   P4-3216
Technical specifications    
Maximum length of incoming sheet (in) 137.6 137.6
Maximum width of incoming sheet (in) 60 60
Maximum diagonal that can be rotated (in) 137.8 137.8
Maximum bending force (kN) 625 660
Maximum clamping force (kN) 825 1060
Maximum bending length (in) 122 126
Maximum bending height (in) 10 6.5
Minimum thickness (gage) 25 25
Maximum thickness and bending angle steel, UTS 59500 psi (gage) 11 (±90°)
13 (±130°)
14 (±135°)		 11 (±90°)
13 (±130°)
14 (±135°)
Maximum thickness and bending angle stainless steel, UTS 84200 psi (gage) 13 (±90°)
14 (±125°)
16 (±135°)		 13 (±90°)
14 (±125°)
16 (±135°)
Maximum thickness and bending angle aluminium, UTS 38500 psi (gage) 7 (±120°)
8 (±130°)
9 (±135°)		 7 (±120°)
8 (±130°)
9 (±135°)

 

Machine P4-3220  P4-3816  
Technical specifications  
Maximum length of incoming sheet (in) 151.5 157
Maximum width of incoming sheet (in) 60 60
Maximum diagonal that can be rotated (in) 157.4 157.5
Maximum bending force (kN) 660 660
Maximum clamping force (kN) 1060 1060
Maximum bending length (in) 126 15.75-126 126-151.57
Maximum bending height (in) 7.9 6.5
Minimum thickness (gage) 25 25
Maximum thickness and bending angle steel, UTS 59500 psi (gage)

11 (±90°)
13 (±130°)
14 (±135°)

11 (±90°)
13 (±130°)
14 (±135°)

13 (±125°)
14 (±130°)
16 (±135°)
Maximum thickness and bending angle stainless steel, UTS 84200 psi (gage)

13 (±90°)
14 (±125°)
16 (±135°)

 13 (±90°)
14 (±125°)
16 (±135°)		 13 (±90°)
14 (±120°)
16 (±135°)
Maximum thickness and bending angle aluminium, UTS 38500 psi (gage)

7 (±120°)
8 (±130°)
9 (±135°)

7 (±120°)
8 (±130°)
9 (±135°)

7 (±120°)
8 (±130°)
9 (±135°)

 

Machine P4-4020  
Technical specifications  
Maximum length of incoming sheet (mm) 157.48
Maximum width of incoming sheet (mm) 60
Maximum diagonal that can be rotated (mm) 159.45
Maximum bending force (kN) 660
Maximum clamping force (kN) 1060
Maximum bending length (mm) 17.75-126 126-151.57 151.57-157.48
Maximum bending height (mm) 8 8  8
Minimum thickness (mm) 25
Maximum thickness and bending angle steel, UTS 410 N/mm2 (mm)

11 (±90°)
13 (±130°)
14 (±135°)

13 (±125°)
14 (±130°)
16 (±135°)

16 (±130°)
Maximum thickness and bending angle stainless steel, UTS 660 N/mm2 (mm) 13 (±90°)
14 (±125°)
16 (±135°)		 13 (±90°)
14 (±125°)
16 (±135°)		 18 (±120°)
Maximum thickness and bending angle aluminium, UTS 265 N/mm2 (mm)

7 (±120°)
8 (±130°)
9 (±135°)

7 (±120°)
8 (±130°)
9 (±135°)

11 (±125°)

Values refer to a standard machine. Salvagnini reserves the right to modify this data without warning.

P1
Developed to fit in 8sqm, designed to produce with just 3 kW and optimized to astound you with its bending speed, the P1 is the solution Salvagnini is offering as an alternative to traditional bending.
more info
P2
P2 is the ultimate panel bender able to efficiently produce a large variety of parts. Totally automatic, it guarantees that the first part is a good part.
more info
P4
40 years of automatic panel bender P4: simply our trademark.
Welcome to factory 4.0.
more info
L3
The L3 is the machine that Salvagnini has dedicated exclusively to fiber. Its cutting-edge technology means that it is able to reach the very highest levels in terms of speed and accuracy
more info
L5
With the Salvagnini single-optic cutting head, the compass structure and the cutting parameters developed specifically for it, the L5 provides quality cutting across a wide range of thicknesses with high dynamics.
more info
B3
The B3 was designed by combining the features and benefits of electric and hydraulic press brakes with Salvagnini's in-depth knowledge of automation, software, mechanics and electronics.
more info
ROBOFORMER
The press-brake cell with a single controller and single program, ideal for automatic light-out solutions. A single machine capable of satisfying all your production needs accurately and effectively.
more info
S1
S1 implements innovative and original elements, that make it a solution with a wider range of applications, that goes beyond common similar technology and is unique in the market.
more info
S4
S4Xe: you have chosen to work with the best. An array of technology that guarantees high performance and process efficiency. The winning solution even when working in line with panel benders.
more info
FlexCell
FlexCell combines the features of a Salvagnini
panel bender and a press-brake and is the only solution of its kind on the market for getting the most out of bending.
more info
S4 + P4 line
Flexible manufacturing system. The S4+P4 line is one of Salvagnini’s most popular solutions. It punches, shears and bends sheet metal totally automatically. The first prototype dates back...
more info
MV Automatic tray store
MV automatic tray stores act as a backbone for the entire factory, coordinating and moving automatically the materials needed for the different machining processes just in time, reducing transfer costs and times, while increasing machine efficiency.
more info
Automatic Job Shops
In an AJS™ system, panel production through punching, shearing, laser cutting and/or bending is both automatic and flexible, satisfying a wide variety of production strategies, such as lean...
more info