P2 - Flexible bending solution
The P2 is the ultimate Salvagnini panel bender, natively combining productivity, with its automatic bending and handling cycles, and flexibility, with its universal bending tools. Equipped with an automatic ABA blankholder, the P2 doesn't require re-tooling and completes an average of 17 bends per minute.
It uses universal bending tools which automatically adapt in-cycle to the panel geometry, without machine down times or manual re-tooling, allowing batch-one or kit productions.
The technical solutions adopted (Direct Drive and pneumatic and electric actuators) allow it to respect both people and the environment without reducing its productivity. It runs with a minimum quantity of long-life oil, inside a fully sealed circuit.
The integrated adaptive technologies (advanced sensors, bending formula, MAC3.0) make the system intelligent and able to automatically adapt to changes in the material and the external environment, eliminating waste and corrections, and extending the range of products that can be made.
The proprietary LINKS and OPS software establish communication between the system and the company departments involved in the production flow.
How to combine productivity and flexibility?
Conventional bending is characterized by an average OEE of 30%, with flexibility dependent on the tool change system - which is often costly and more time-consuming than on a panel bender - or on the installation of more than one press brake. The P2 panel bender, on the other hand, natively combines productivity, with its automatic bending and handling cycles, and flexibility, with its universal bending tools. And with its advanced cycles, the P2 completes an average of 17 bends per minute.
How long does re-tooling take?
The P2 doesn’t require re-tooling: the upper and lower blades, the counterblade and the blankholder are universal tools that are able to process the whole range of thicknesses and machinable materials.
Do manual loading and unloading affect the total cycle time?
Loading and unloading are performed by the operator, who positions the sheet metal on the worktable and collects the product after bending. The P2's cycle minimizes the impact of these activities on total cycle time, as it allows the product to be unloaded after positioning the sheet on the worktable, thus combining two operations in a single action.
Does the P2's set-up affect productivity?
The set-up has minimal impact on the panel bender's productivity: when the program is loaded, the blankholder automatically adapts in masked time, and the manipulator gets into position for gripping and handling the sheet.
How to produce in kits or batch-one?
The P2 is equipped with an automatic ABA blankholder, which adapts the length of the tool according to the size of the part to be produced without machine down times or manual re-tooling even in cycle: the ideal solution for batch-one and kit production.
How to make production independent of changes in material?
MAC3.0 is the set of integrated technologies – sensors, formulas and algorithms – that make the panel bender intelligent: it eliminates waste and reduces corrections, measuring in-cycle and automatically compensating any variability in the material being machined.
How to make production independent of external variations?
The P2 integrates advanced sensors that measure the actual thickness and effective size of the part to be machined, and detects any deformations caused by variations in temperature. The data are fed in real time into the bending formula, which defines the correct force to apply to the sheet metal, guaranteeing the precision, repeatability and quality of the finished product.
How to adapt the panel bender to different production needs?
In addition to the automatic ABA blankholder, the P2lean offers a range of options to guarantee maximum versatility and adaptability, to suit any production strategy or mix.
How to make the process reactive to changes in the production lists?
The P2 can be equipped with proprietary OPS software, which ensures communication between the panel bender and the factory ERP: depending on needs, OPS manages the production of sequences of different parts. Universal bending tools, automatic in-cycle set-up and automatic handling allow the system to respond to any requests immediately.
How to achieve maximum precision?
The sheet metal is centered, just once at the start of the process, against controlled reference stops: this minimizes the cycle time as well as any precision errors, which are all absorbed by the first bend. The bending formula automatically optimizes the bending parameters to reduce waste, while MAC3.0 detects and automatically compensates any variability in the material to guarantee precise, high-quality bends.